CATEGORIES
Polisport Mud Pro II Mudguard Set 26"-29"
Supplier: Polisport
Manufacturer Part No: 8624500005
Unit: Each
Added: 19/11/2026
RRP: £27.99
Images are for illustration purposes only.
Pro-forma accounts: please call the office with payment details once you submit your order.
Please login to view stock information
Front and rear mudguard set for mountain bikes and e-MTB, 26-29" wheels, tyres up to 2.60". The Polisport Mud-Pro II front and Mud-Pro rear fit and come off without tools and sit close to the tyres.
The Polisport Mud-Pro II set pairs the Mud-Pro II front mudguard and the Mud-Pro rear mudguard, for mountain bikes and e-MTB with 26-29" wheels and tyres up to 2.60. The front mounts inside the fork''s steerer tube, the rear clamps to the seatpost, and both also fit trekking bikes with 28" (700c) wheels and no rear rack. Their slim profile and dual finish, matt and gloss, give them a minimal look on the bike.
WHY FRONT AND REAR
On wet ground each tyre throws its own spray: the front at your face, legs and drivetrain, the rear up your back and onto the saddle. With a mudguard on each wheel, you finish a trail ride cleaner, or get to work on a trekking bike in cleaner clothes.
FRONT MUDGUARD
Choose the bushing for your steerer, fit its rubber sleeve and close the lever: the bushing expands and holds the mudguard. A height spacer is included for forks that need extra clearance to the arch, or where the steerer sits deep inside the crown. Set the angle to run it close to the tyre, with the clearance the tyre needs when the fork compresses.
REAR MUDGUARD
The clamp fits round seatposts of Ø27-35 mm and locks with a lever. Height, angle and deflector flap adjust independently, so it sits close to the tyre and, on a full-suspension bike, leaves the rear wheel room to move. For muddier rides, the 75 mm tail extension takes it from 625 to 700 mm.
ON AND OFF
Both levers are part of the mounts and stay on the mudguards, so no tools are needed: they are quick to fit for a wet ride and take off on a dry day. All adjustments use the same 4 mm hex key, and the tail extension fixes with a PH2 screwdriver (tools not included).
TECHNICAL SPECIFICATIONS
Wheels: 26", 27.5" and 29"; 28" (700c) on trekking bikes without a rear rack
Maximum tyre width: 2.60"
Front mount: inside the steerer tube, open from below, Ø16-35 mm inside
Rear mount: round seatpost, Ø27-35 mm
Forks: suspension or rigid
Brakes: disc and V-brake
Length: front 640 mm; rear 625 mm, or 700 mm with the tail extension
Weight: front 166-205 g (depending on bushing and height spacer); rear 236 g; set 402-441 g
Material: polypropylene (PP)
Finish: matt and gloss
In the box: front mudguard with lever, 4 bushings (Ø16-20, 20-24, 24-28 and 28?35 mm), 2 rubber sleeves (Ø16-24 and 24-35 mm), height spacer; rear mudguard with clamp and lever, 75 mm tail extension with 2 screws; instructions
Tools: 4 mm hex key, PH2 Phillips screwdriver (not included)
Production: Made in Portugal
*Without Fidlock
