CATEGORIES
Polisport Mud Pro II Front Mudguard 26"-29"
Supplier: Polisport
Manufacturer Part No: 8624300004
Unit: Each
Added: 19/11/2026
RRP: £15.99
Images are for illustration purposes only.
Pro-forma accounts: please call the office with payment details once you submit your order.
Please login to view stock information
Front mudguard for mountain bikes and e-MTB with 26-29" wheels and tyres up to 2.60". The Polisport Mud-Pro II mounts inside the steerer tube and fits or comes off without tools.
The Polisport Mud-Pro II is a front mudguard for mountain bikes and e-MTB with 26-29" wheels and tyres up to 2.60. It mounts inside the fork''s steerer tube and also fits trekking bikes with 28" (700c) wheels. Its slim profile and dual finish, matt and gloss, give it a minimal look on the bike.
WHY A FRONT MUDGUARD
On wet ground the front tyre throws mud and water at your face, legs and drivetrain. The 640 mm mudguard sits over the tyre and catches spray as it leaves it, so you finish a trail ride cleaner, or get to work in cleaner clothes on a trekking bike.
MOUNTING
The mount goes into the steerer tube from below the crown. Choose the bushing that matches the inside of your steerer, fit its rubber sleeve for grip and close the lever: the bushing expands and holds the mudguard in place. For forks that need extra clearance to the arch, or where the steerer sits deep inside the crown, a height spacer is included. A 4 mm hex key (not included) sets the angle, so you can run the mudguard close to the tyre to catch spray near its source, with the clearance the tyre needs when the fork compresses.
ON AND OFF
The lever is part of the mount and stays on the mudguard, so no tools are needed. Release it and the whole mount comes out, leaving nothing on the bike: it is quick to fit for a wet ride and take off on a dry day.
MATCHING REAR MUDGUARD
A Mud-Pro rear mudguard is sold separately. There is also a Mud-Pro II mudguard set.
TECHNICAL SPECIFICATIONS
Wheels: 26", 27.5" and 29"; 28" (700c) on trekking bikes
Maximum tyre width: 2.60"
Steerer: open from below, Ø16-35 mm inside
Forks: suspension or rigid
Brakes: disc and V-brake
Length: 640 mm
Weight: 166-205 g, depending on bushing and height spacer (lever and rubber sleeve included)
Material: polypropylene (PP)
Finish: matt and gloss
In the box: front mudguard with lever, 4 bushings (Ø16-20, 20-24, 24-28 and 28-35 mm), 2 rubber sleeves (Ø16-24 and 24-35 mm), height spacer, instructions
Tools: 4 mm hex key for the angle only (not included)
Production: Made in Portugal
*Without Fidlock
